The IC-910H is an all new 2m/440 MHz/1.2 GHz** all mode satellite radio. Measuring only 9 1/2(W) X 3 11/16(H) X 9 13/32(D) in. and weighting 10 lb (without UX-910), it is compact and lightweight for field operation.

The IC-910H features a powerful 100 W of output on 2 meter band, and 75 W on 430/440 band provided by the newly designed power amplifier circuit, which employs bipolar transistors in parallel. The combination of the aluminum die-cast chassis and effective cooling fan ensures stable output for continuous operation.

The IC-910H receiver sensitivity is an amazing 0.11 µV (at 10 dB S/N on SSB, CW), while the image and spurious responses are minimized for good signal fidelity. Used with the optional preamplifiers for each band, indispensable for receiving weak DX signals or satellite communications, you will experience top class receiving characteristics in the VHF/UHF bands.

By adding the optional UX-910 1200 MHz band unit, the IC-910H becomes an all mode tri-band transceiver. It is also capable of crossband and full duplex operation.

The IC-910H has two data sockets for simultaneous two band packet communications. High speed PLL lockup time makes 9600 bps high speed packet communications possible.

In the satellite mode, the downlink and uplink frequencies are displayed simultaneously on the main and sub bands respectively. Normal/reverse tracking is available, and Doppler shift compensation is a breeze. Ten satellite memory channels store uplink & downlink frequencies and operating mode.

Optional UT-106 DSP unit provides AF DSP (digital signal processing) functions: noise reduction and automatic notch filter. When two UT-106 units are installed in the IC-910H, the DSP functions work for the main and sub bands simultaneously.

Specifications:

• 100 W of stable output power on VHF (75 W on UHF)
• High performance receiver
• Additional 1200 MHz band unit (UX-910)
• 9600 bps packet operation
• Two data sockets for simultaneous two band packet communications.
• Satellite communications
  • Simultaneous display of uplink and downlink frequencies
  • Satellite memory channels
  • Normal/reverse tracking
  • Easy Doppler compensation
• All receiver functions work on main and sub bands
• IF shift
• Attenuator
• Noise blanker
• Sweep function observes conditions around the displayed frequency
• Four types of scanning
• Memory pad temporarily stores the operating frequencies and modes
• Electronic keyer with a dot/dash ratio control
• FM-narrow mode (FM-N) (except 1200 MHz band)
• CI-V capability for PC control
• 50 tone CTCSS encoder
• One touch repeater function

** An optional UX-910 1200 MHz band unit is required for 1200 MHz operation.