DJ-C7T/E SPECIFICATIONS
New Generation Credit Card Sized VHF/UHF DUAL-BAND Micro Transceiver
|
| GENERAL |
| Frequency Coverage: | T/USA model
TX/RX: 144-147.995MHz/420-449.995MHz
RX: 88.1-107.995/108-173.995/380-511.995MHz AM/FM/WFM
E/EU model
TX/RX: 144-145.995MHz/430-439.995MHz
RX: 87.5-107.995MHz WFM |
| Modulation: | TX: 16k0F3E (FM) RX: WFM/FM/AM (where permitted) |
| Receiver System: | Double Conversion Super-heterodyne (WFM: Single CSH) |
| Channel Step: | Auto/5/6.25/8.33/10/12.5/15/20/25
/30/50/100/125/200KHz |
| Memory Channels: | 200ch with 5 PS pairs, 1 priority and 1 auto-repeater pair |
| Tone Encoder: | 39 tone encoder standard |
| Tone Decoder: | 39 tone decoder standard |
| Offset range: | 0 ~ 99.995MHz |
| Deviation: | +/- 5KHz |
| TX Output: | 300mW with EBP58N / 500mW with 6Vdc power-source |
| TX Spurious emissions: | less than -60dB |
| Frequency Stability: | -7 to +3ppm (-10 ~ + 50 degrees C.) |
| Sensitivity (12dBSINAD): | Hambands -15dBu or better / WFM -3dBu average |
| Selectivity: | +/-12KHz or more(-6dB) +/-35KHz or less (-60dB) |
| I.F.: | 1st: 50.85MHz(WFM 10.7MHz) 2nd: 450KHz | |
| AF output: | 100mW or more (MAX), 90mW or more (10% dist. 8 ohm) at 6.0Vdc |
| Power Supply Requirements: | 3.7Vdc EBP58N / 3.7 - 6.0Vdc external power source |
| Current Drain (approx) : | TX: 320mA / RX (squelched): 70mA / RX (BS-on): 19mA |
| Operating Temperature: | -10 ~ +60 degrees C, 14 ~ 140 degrees F |
| Dimensions: | 56(W) x 96(H) x 14.5(D)mm (without projections) or 2.28 x 3.78 x 0.57 inches |
| Weight: | approx. 102g or 3.59oz antenna/EBP58N inclusive |
