|
IC-V8000
75W! 2 Meter Mobile CTCSS/DTCS, Weather Alert Scan, 207 Alphanumeric Memories, HM-133V Mic...>
|
|
|
|
IC-7200
IC-7200... IN STOCK NOWBuilt for the great outdoorsWith an excellent balance between cost and performance, the IC-7200 will open the doo...>
|
|
|
|
IC-7600
Icom IC-7600 100W HF Tranceiver
Purchase an IC-7600 by September 30th and get a $200 Gift Certificate for future purchases at GigaParts.com!...>
|
|
|
|
IC-R1500
.01 - 3299.999 MHz (Cell Blocked) Mobile/Base Receiver, AM/FM/WFM/USB/LSB/CW, Unlimited Memories, Real Time Bandscope
|
|
|
|
|
|
|
| |
SKU: ZIC-91AD
Discontinued |
ICOM IC-91AD
DISCONTINUED
|
|
|
|
|
| Product Description |
5 Watt HT 2M/70CM, 7.4V Li-Ion Battery Pack, D-STAR DV mode available (Digital Voice + data), One touch reply button, Built-in voice recorder and auto reply function, Optional PC remote control capability, Position information exchange, DX communication over the D-STAR system
- D-STAR DV mode available (Digital Voice + data)
The IC-91AD* provides DV mode operation with an AMBE codec. 950 bps data can be sent simultaneously with the digital voice transmission. When you receive an FM mode (or other mode) signal while operating in DV mode, the automatic DV detection function changes the operating mode to the detected mode.
* Optional UT-121 is required for use with IC-91A.
- One touch reply button
The newly adopted one-touch reply [CALL RX->CS] button memorizes the received callsign(s) at the touch of the button. This function allows you to call back to the calling station without hassle. In addition, up to 20 received callsigns are stored as the received call history.
Built-in voice recorder and auto reply function
The built-in voice recorder* records an incoming call for up to 30-second (approx.), (or 15 Sec. ⋅ 2 tracks, 10 Sec. ⋅ 3 tracks). The 10 Sec. transmit memory allows you to record your callsign, CQ and automatically answers when you receive a message. (* Available in DV mode only)
- Optional PC remote control capability
When connected to a PC via a RS-232C cable, most functions of the IC-91AD/A* can be controlled from the PC with optional RS-91 software. In DV mode operation, you can send and receive short messages of 20 characters (Max.) on the PC. (* Also available in analog mode)
- Position information exchange
When connected to an external GPS receiver (NMEA 0183 format), own and other station’s position information can be sent and received*. The IC-91AD sends the position data either by holding the PTT switch, or at a preset interval (5 sec.–30 min.), depending on the setting.
* GPS data receive only is possible when no external GPS receiver is attached.
- DX communication over the D-STAR system
The 144/440MHz D-STAR repeaters are now available! With the IC-91, you can cross band (144/440/1200MHz) operation and long distance communication over the D-STAR network. |
|
|
