|
IC-7600
Icom IC-7600 100W HF Tranceiver
Purchase an IC-7600 by September 30th and get a $200 Gift Certificate for future purchases at GigaParts.com!...>
|
|
|
|
IC-R1500
.01 - 3299.999 MHz (Cell Blocked) Mobile/Base Receiver, AM/FM/WFM/USB/LSB/CW, Unlimited Memories, Real Time Bandscope
|
|
|
|
IC-V8000
75W! 2 Meter Mobile CTCSS/DTCS, Weather Alert Scan, 207 Alphanumeric Memories, HM-133V Mic...>
|
|
|
|
IC-7200
IC-7200... IN STOCK NOWBuilt for the great outdoorsWith an excellent balance between cost and performance, the IC-7200 will open the doo...>
|
|
|
|
|
|
|
| |
SKU: ZIC-ID-800
Discontinued |
ICOM ID-800H
DISCONTINUED
|
|
|
|
|
| Product Description |
2M/70CM Dual Band Mobile Transceiver. 55W VHF, 50W UHF. Receives 118-173, 230-549, 810-999 (Cell Blocked). Modes: FM(analog), AM(analog RX), and GMSK(digital). Includes 3.5M Separation cable.
Digital Dual Band Mobile with Wideband Receiver
Digital Voice + 950 bps* data capability
The ID-800H can transmit and receive D-STAR format digital voice and 950 bps data communication, simultaneously. The Digital features of the ID-800H are compatible with IC-2200H, IC-V82 and ICU82 radios with the optional UT-118 installed. In addition, analog FM mode is also available.
* Approximate value.
GPS Coordination data
When an external GPS receiver (NMEA 0183 format) is connected to the ID-800H, yours and other station’s position information can be exchanged and shown on the display. When the receiving side is connected to a PC*, map plotting is possible. Supported data formats are GLL, GGA, RMC, GSA and VTG sentences.
* Map plotting software required (Not supplied by Icom ).
Calling by callsign
In the digital voice mode, your callsign and the calling station’s callsign (or CQ message) are included in each transmission. The callsign squelch allows you to choose an incoming call selected by the callsign. Also, received callsigns are automatically stored in the memory.
And more digital features
• 20-character short data message
• Digital code squelch • EMR communication
• Digital pocket beep • Stand-by beep
Powerful 55W/50W output power
The ID-800H has 55W/50W (VHF/UHF) output. It is Icom’s most powerful dual band mobile. High power for long distance communications plus reduced power settings (15/5W) for local communications.
Wideband receiver
The ID-800H wideband receiver covers 118–173, 230–549 and 810–999MHz* as standard. Listen to your Amateur VHF/UHF bands, as well as aviation, marine, weather and other utility communications in a compact mobile package.
* Excluding Cellular range. AM, FM, N-FM mode only.
Detachable front panel
The separation cable, OPC-600/R, is supplied with the radio allowing the compact remote control head* to be installed almost anywhere.
* 111 (W) × 40(H) × 38.5 (D) mm; 43/8 × 19/16 × 117/32 in.
500 alphanumeric memory channels
With this much memory, you can fill your ID-800H with all of your favorite frequencies and operation settings! Then name each memory channel with up to 6 characters for quick channel identification.
ADDITIONAL FEATURES
Multi color display (Amber, yellow, and green) Built-in CTCSS and DTCS tone squelch Pocket beep and tone scan Selectable squelch delay Remote control microphone, HM-133 Narrow band FM capability RF attenuator linked to the squelch control 16 DTMF memory channels (24 digits) 9600bps data connector (mini DIN 8-pin) Auto repeater function* Weather channel with weather alert* (*U.S.A. version only)
|
|
|
