|
IC-7200
IC-7200... IN STOCK NOWBuilt for the great outdoorsWith an excellent balance between cost and performance, the IC-7200 will open the doo...>
|
|
|
|
IC-7600
Icom IC-7600 100W HF Tranceiver
Purchase an IC-7600 by September 30th and get a $200 Gift Certificate for future purchases at GigaParts.com!...>
|
|
|
|
IC-91A 25
5 Watt HT 2M/70CM, 7.4V Li-Ion Battery Pack, D-STAR DV mode upgradeable (Digital Voice + data), One touch reply button, Built-in voice recorder and au...>
|
|
|
|
IC-V8000
75W! 2 Meter Mobile CTCSS/DTCS, Weather Alert Scan, 207 Alphanumeric Memories, HM-133V Mic...>
|
|
|
|
IC-R1500
.01 - 3299.999 MHz (Cell Blocked) Mobile/Base Receiver, AM/FM/WFM/USB/LSB/CW, Unlimited Memories, Real Time Bandscope
|
|
|
|
|
|
|
|
| Product Description |
Advanced PC Controlled Receiver
- Includes Bonito CS4.5 software at time of purchase
Product Features:
- Dualwatch Capability
The IC-PCR2500 covers 0.01 - 3299.999 MHz in AM, FM, WFM, SSB, CW, DV and P25 modes on the main receiver, while the sub-receiver can simultaneously cover 50 - 1300 MHz in AM, FM and WFM modes
- Two antennas are required for dualwatch receive.
- Digital Mode Reception
The optional UT-118 D-STAR digital unit and UT-122 P25 digital unit can be installed in the IC-PCR2500. Catch the action in digital communications!
- Diversity Receive Capability
When two antennas are connected to the IC-PCR2500, it provides diversity reception. The diversity reception continuously compares the signal strength and selects the better antenna for maintaining good sound and receive quality.
- Available in FM/P25/DV mode between 50 - 1300MHz only.
- Not available when using dualwatch
- 3 Receiver Screens to Choose From
Choose the look you want! Multi-function Receiver, Component and Simple screens are available.
- Multi Channel Monitor Function
You can monitor up to 25 channels. The software tracks the band activity with S-meter levels as channel status is visually represented by three background colors. Simply click the busy channel and the PCR2500 tunes to the active channel.
- DSP Capability
If you are into weak signal work, the optional UT-106 DSP unit is a must have. This add-on gives you noise reduction and auto notch filter functions to improve the S/N ratio for improving received signal quality.
- Bandscope and Time-Line Scope
Along with a 5MHz (Max.) wide range bandscope, the timeline scope allows you to observe the band condition over the past 100 minutes.
- AF output is muted when the bandscope range is between 500kHz and 5MHz or operating in CW or SSB modes.
- Recording Function
You can record audio in WAV format directly through the USB port. Skip over hours of channel inactivity with the software?s remote control function that pauses and resumes recording according to the channel activity.
Other Features:
- VSC ignores unmodulated signals or heterodynes
- CTCSS/DTCS tones and duplex mode operation for monitoring a repeater
- S-meter squelch
- Pocket beep function
- IF filter selection
- IF shift function (SSB, CW mode only)
- Noise blanker eliminates pulse type noise. (SSB, CW, AM mode only)
- 20dB (approx.) RF attenuator (below 1300MHz)
- Auto memory write scan searches for a signal, and when a signal is detected, the received frequency is automatically stored in PC memory
- AFC function (Auto Frequency Control) automatically follows an FM mode signal when the signal?s frequency drifts. (BW: 6kHz or 15kHz)
- AGC function; Fast/slow setting is available
- Weather alert function (U.S.A. and Canada versions only)
- 24-digit DTMF tone decoder
- Squelch delay
- Up to 2600 memory channels per file
- U.S.A. Customers check out www.icomreceivers.com for frequency lists in your neighborhood and region. (Based on FCC licensee database.)
PC System Requirements:
- Microsoft? Windows? XP/2000/ME/98SE
- USB 1.1 or 2.0
- Intel? Pentium? III 450MHz or faster (Pentium? 4 recommended)
- Hard disk with at least 50 MB of free disk space
- At least 128 MB of memory (256MB or more recommended)
- Display with 1024 ? 768 pixel resolution, high color
- CD-ROM or DVD drive is required for software installation
- USB audio dropouts or gaps may occur because of a lack of PC power
- Additional hard disk space is required for recording sound or storing scope data
|
|
|
