Icom

$1,549.00
Icom SKU: ZUS-0989

$1,549.00

Free Shipping!

SOLD!!!

Check Store Stock

Huntsville Store:

Las Vegas:

Used Icom IC-756 ProIII HF/6M with PS-125 Power Supply

This radio and power supply are both in excellent condition.     

Icom and the renowned IC-756PRO series continue to make ham radio history: 
First 32-bit floating point DSP transceiver 
First transceiver with customizable filter shapes. There were no optional filters to buy, for none were needed. 
First mid-class HF transceiver with +30dBm-class third-order intercept point* 
First amateur HF transceiver with a large TFT color LCD For the new IC-756PROIII, 
Icom’s combined the cutting-edge receiver technology of the IC-7800 with the familiar ergonomics of the IC-756PROII. Take your DXing to the next level with Icom’s IC-756PROIII.
Used Icom IC-756 Pro III  HF/6M Radio

Frequency coverage
USA version
Rx 
Tx
 
  
 
 
 
European version
Rx 
Tx

 
 

0.030– 60.000MHz*1
1.800– 1.999MHz3.500– 3.999MHz
5.3305, 5.3465, 5.3665, 5.3715, 5.4035MHz*2
7.000– 7.300MHz10.100–10.150MHz
14.000– 14.350MHz18.068–18.168MHz
21.000– 21.450MHz24.890–24.990MHz
28.000– 29.700MHz50.000–54.000MHz
 
0.030– 60.000MHz*1
1.810– 1.999MHz3.500– 3.800MHz
7.000– 7.100MHz10.100–10.150MHz
14.000– 14.350MHz18.068–18.168MHz
21.000– 21.450MHz24.890–24.990MHz
28.000– 29.700MHz50.000–52.000MHz
*1Some freq. bands are not guaranteed. *2 USB mode only
ModeUSB, LSB, CW, RTTY, AM, FM
Number of memory Ch.101 (99 regular, 2 scan edges)
Antenna connectorSO-239×2 and phono [RCA; (50Ω)]
Temperature range

–10°C to +50°C;

+14°F to +122°F

Frequency stability

Less than ±0.5ppm

(1 min. after power ON; 0°C to 50°C; +32°F to +122°F)

Frequency resolution1Hz
Power supply requirement13.8V DC ±15% (negative ground)
Power consumption
TxMax. power23A
RxStandby3.0A (typ.)
 Max. audio3.5A (typ.)

Dimensions

(projections not included)

340(W)×111(H)×285(D) mm;

1338 (W)×438 (H)×11732 (D) in

Weight (approx.)9.6kg; 21lb 1oz
Transmitter

Output power
SSB, CW, RTTY, FM
AM

(continuously adjustable)
5–100W
5–40W
Modulation system
SSB
AM
FM
 
DPSN modulation
Digital low power modulation
Digital phase modulation
Spurious emission

Less than –50dB (HF bands)

Less than –60dB (50MHz band)

Carrier suppressionMore than 40dB
Unwanted sideband suppressionMore than 55dB
Microphone connector8-pin connector (600Ω)
Receiver
Receive systemTriple conversion superheterodyne system
Intermediate frequencies
1st64.455MHz (for all modes)
2nd455kHz (for all modes)
3rd36kHz (for all modes)
Sensitivity (typical):

Frequency

Range (MHz)

SSB, CW, RTTY
(at 2.4kHz BW)
AM
(at 6kHz BW)

FM
(at 15kHz BW)

0.50–1.79913μV
1.80–27.990.16μV*12μV*1
28.0–29.990.16*12μV*10.5μV*1
50.0–54.00.13μV*21μV*20.32μV*2

10dB S/N for SSB, CW, RTTY and AM, 12dB SINAD for FM

*1Pre-amp 1 is ON, *2Pre-amp 2 is ON

Squelch sensitivity
SSB, CW, RTTY
FM

(Pre-amp: OFF)

Less than 5.6μV
Less than 1μV

Selectivity
SSB, RTTY (BW: 2.4kHz)
 
 
 
CW (BW: 500Hz)
 
AM (BW: 6kHz)
 
FM (BW: 15kHz)

(representative value)

More than 2.4kHz/–6dB

Less than 3.2kHz/–40dB

Less than 3.6kHz/–60dB

Less than 4.3kHz/–80dB

More than 500Hz/–6dB

Less than 700Hz/–60dB

More than 6.0kHz/–6dB

Less than 15.0kHz/–60dB

More than 12.0kHz/–6dB

Less than 20.0kHz/–60dB

Spurious and image

rejection ratio

More than 70dB

(except IF through on 50MHz band)

AF output power

(at 13.8V DC)

More than 2.0W at 10% distortion

with an 8Ω load

RIT variable range±9.999kHz
PHONES connector2-pin connector 6.35 (d) mm (1⁄4″)
EXT SP connector2-pin connector 3.5 (d) mm (1⁄4 ″) /8Ω
Antenna Tuner

Matching impedance range
HF bands
50MHz band 

 
16.7-150Ω unbalanced*1
20-125Ω unbalanced*2
*1Less than VSWR 3:1
*2Less than VSWR 2.5:1
Min. operating input power8 W
Tuning accuracy

VSWR 1.5:1 or less

(SWR after the motor has stopped)

Insertion lossLess than 1.0dB (after tuning)
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account