This amplifier is in excellent condition.
Wide frequency coverage with 1 KW output*
All HF bands plus 50 MHz are covered. The IC-PW1 provides a stable, clean and low distortion 1 kW from 1.8 MHz to 50 MHz*. In addition, full duty cycle (even during more demanding RTTY or SSTV operation) and full break -in operation are possible. Great for DX'peditions or contest operation.
*Guaranteed within amateur bands only.
Wide ALC adjustable range
Internal circuitry allows the ALC to be adjusted over a wide range. This means that the IC-PW1 can be used with almost any HF, 6 m or HF/6 m rigs - not only Icom rigs*
*Ask your dealer about usable exciters.
Dimensions, including amplifier, power supply, tuner and controller, are only 350(H) x 269(W) x 378(D)mm* And, because the controller is detachable, the IC-PW1 can be installed almost anywhere in your shack.
*625⁄32(H) x 225⁄32(W) x 91⁄16 in.
Other outstanding features
- Automatic antenna tuner built-in
- Automatic AC input voltage selector is employed
- Current (Ip), Voltage (Vp), temperature, SWR and output power protectors are available
|Frequency Coverage (MHz)|
*Inhibited in the US version.
|Power supply requirements||180 - 264 V AC or 90 - 132 V AC (single phase; 50 / 60 Hz)|
Less than 15 A (max. output at 200 V)
Less than 20 A (max. output at 100 V)
|Usable temperature range|
-10°C to +40°C;
+14°F to +104°F.
|Duty cycle||Full duty|
|Input connector||SO-239 x 2 (50 ohm)|
|Output connector||SO-239 x 4 (50 ohm)|
|Driving power||Max. 100 W|
Less than -60 dB (HF bands)
Less than -50 dB (50 MHz)
Output matching range
(tuner switch ON)
16.7 ohms to 150 ohms impedance (HF bands)
20.0 ohms to 125 ohms impedance (50 MHz)
|Auto tuning accuracy||VSWR 1.5:1 or less|
|Min. required input power||60 W|
|Insertion loss||Less than 1 dB (after tuning)|
- Controller separation cable
- ACC cables
- Coaxial cable with PL-259 plugs