The Windows version of the RT Systems programmer for this radio now works with "generic" USB cables. USB cables have become a little more consistent and reliable. Consider this as you decide which cable will be best for you.
Generic USB
Cables |
- The cable may not work on Windows 11.
- You are responsible for finding the drivers for that cable and assigning the correct COM port.
- Be sure the cable is wired properly and has the proper electronics and connection for the radio. (Beware: This radio is VERY sensitive to incorrect wiring. You could damage the radio if the cable is not correct. ALWAYS plug and unplug any cable with the radio off for additional protection of the radio's circuitry.)
|
| USB-29F |
- The RT Systems USB-29F cable works with Windows 11
- Drivers are installed during installation of the programmer. Sometime help is needed to complete driver installation: we are here to help with that.
- You do not need to know or assign a com port in the program. The programmer finds the cable automatically.
- If there is a problem with communications between the radio and the computer, we are here to help....and we know LOTS of tricks!!
|
Radio Compatibility
RT Systems programmers work with the radio specified from the manufacturer shown in the description.
RT Systems programmers are designed to work with manufacturer's firmware or approved firmware upgrades. There is no guarantee, and a great deal of doubt, that the programmer will work with a radio that has been upgraded with a firmware version that is not from the manufacturer. RT Systems takes no responsibility for changes made to such a modified radio during programming.
No implication is made that a programmer is appropriate for a radio with a similar number from a different manufacturer. Actually, purchasing a programmer for a radio from a different manufacturer just because it has a similar number is strongly discouraged.
RT Systems takes no responsibility for the performance of your radio should you choose to use a programmer other than that listed specifically for the manufacturer and model of that radio you are attempting to program. Exceptions are noted in the description for several products. Check there if you feel your radio is a variant of the one shown, but be advised that the manufacturer will never vary. If the model is not listed, you should check with RT Systems prior to your purchase.
Installed software is NOT returnable, exchangeable or refundable.
