Phrozen Aqua Resin Clear Plus 1kg - FMTSTAQCLM-B

• Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
• After printing, please keep used resins in a closed & opaque bottle.
• Avoid mixing used resin with new resin.
• Keep resin away from kids and away from direct sunlight exposure.
• Wear gloves and masks when using resins.
• If this chemical contacts the skin or eye, wash with plenty of water. DO NOT dump resin.
• Please cure it and treat it as general plastic garbage.

Store the wastewater in a tightly sealed container and expose to sunlight to cure all the remaining resin. Once fully cured, treat the cured resin as general trash.

• Weight: 1 kg/bottle
• Density: 1.09 g/cm3
• Viscosity: 50–150 cP
• Surface Hardness: 75–80 Shore D
• Tensile Strength at Break: 23.6 MPa
• Tensile Modulus: 1208.7 MPa
• Elongation at Break, EAB: 13 %
• Notched Izod Impact: 52.2 J/m
• HDT at 0.45 MPa: 49.3 ℃

Store the wastewater in a tightly sealed container and expose to sunlight to cure all the remaining resin. Once fully cured, treat the cured resin as general trash.