Phrozen Castable Resin - Dental Green - 500g - FMTJWCADGS

• Contain 20% wax content.
• Reliable for light to medium pieces casting.
• Great for thin jewelry like wedding rings.
• Clean burnout.
• Zero ash content.

Phrozen Castable Resin W20 Green is developed for reliable casting with clean burnout and zero ash content. It is designed for both jewelry and dental casting, specifically fine and delicate features such as milgrain, micro claw, and wired patterns plus engraved and raised text.

Benefits

• 20% wax content.
• Formulated for casting light to medium pieces.
• Low shrinkage, high precision. Produces prints with smooth and crisp surface finishing.
• With a minimal number of gates, you can easily cast anything you desire. Set up your printed models and clean up casted 3D models effortlessly.
• No foul nor strong odor.

Tips

• XY resolution：0.050 mm
• Shake well before use.
• Check your recommended resin profiles parameters according to your 3D printer. Click here to find your resin profile.
• We recommend washing your prints with 95% IPA and drying it with an air gun.
• Note: Please don’t soak your prints in 95% IPA for over 30 seconds at a time. 

Specs

• Weight: 500g per bottle
• Viscosity: 190-250 cP
• Density: 1.07 g/cm3
• Surface Hardness: 65 Shore D
• Verified clean burnout with these investments: "Prestige Optima", "Plasticast" and "Ultravest Maxx"
• Ash content: 0.0-0.1% (ASTM E1131; TGA)

_{*All specifications have been tested in a laboratory. Please note that certain specifications may be subject to change without prior notice.}