Phrozen FR940 Flame Retardant Resin Gray 1kg - FMTEGFEGYM

• Flame retardant: Phrozen's first ever flame retardant material, it can swiftly diffuse flame within 10 seconds, ensuring the practicality and safety of your high-temperature 3D printed parts.
• UL 94-V-0 Blue Card Certified: As the first resin in Asia to ever obtain the UL 94-V-0 Blue Card certification by Underwriter Laboratories, FR940 is tested not just against minimum standards of safety, but against reputable and trusted standards in the industry.
• Wide Range of Engineering Applications: FR940 is a versatile engineering resin with practical usability in various fields, such as electronic and electrical equipment, automotive industry parts, and more.

• Weight: 1kg per bottle
• Density: 1.14 g/cm3
• Viscosity: 180-285 cP
• Surface Hardness: 75~80 ShoreD
• Tensile Stress at Break: 28.5 MPa
• Tensile modulus: 1812 MPa
• Elongation at Break, EAB: 3.8%
• Notched Izod Impact： 30.7 J/m
• HDT at 0.45 MPa: 59.8℃

*All specifications have been tested in a laboratory. Certain specifications are subject to change without prior notice. For the latest update, please refer to Phrozen’s official website.

• Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
• After printing, please keep used resins in a closed & opaque bottle.
• Avoid mixing used resin with new resin.
• Keep resin away from kids and away from direct sunlight exposure.
• Wear gloves and masks when using resins.
• If this chemical contacts the skin or eye, wash with plenty of water.DO NOT dump resin.
• Please cure it and treat it as general plastic garbage.