Phrozen Onyx Impact Plus PZ Resin 1kg - FMTEGIMPZM

• Weight: 1kg per bottle
• Viscosity: 1800-2000 cP
• Surface Hardness: 72 Shore D
• Tensile Stress at Break: 30.6 MPa
• Young’s Modulus: 943 MPa
• Elongation at Break: 90 %
• Notched Izod Impact: 137 J/m
• Shore D Hardness (5s): 72 D
• Solid Density: 1.3 g/cm3
• Liquid Density: 1.05 g/cm3
• HDT at 0.45 MPa: 52 °C
• Flexural Modulus: 977 MPa

*All specifications have been tested in a laboratory. Please note that certain specifications may be subject to change without prior notice.

• Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
• After printing, please keep used resins in a closed & opaque bottle.
• Avoid mixing used resin with new resin.
• Keep resin away from kids and away from direct sunlight exposure.
• Wear gloves and masks when using resins.
• If this chemical contacts the skin or eye, wash with plenty of water.DO NOT dump resin.
• Please cure it and treat it as general plastic garbage.