MAXI-CHOKER Features:
- Uses proprietary Multi-Mix, Multi-Core, Multi-Turn(TM) ferrite technology for maximum choking (up to -48 dB common mode noise rejection) and maximum bandwidth
- Choose 1.5 KW, 3 KW PEP or 5KW PEP for heavy duty digital modes up to legal limit, 50 ohm SO-239 connectors In/Out, 1-61 MHz, usable to 100 MHz
- Suppresses transmitter coax feed line radiation when installed at antenna feed point or reduces common mode receiver "noise" when installed at radio end of coax.
- Available with ground stud/static bleeder option for solving tough RFI issues
- Available with dual stud/wingnut output for ladder line interface
- Works for all coax fed antennas from 1.8-61 MHz (160-6 meters) - excellent for multi-band beams, verticals, dipoles and highly unbalanced off center fed antennas.
- 2-5 times more common mode noise rejection, wider bandwidth and higher power then competing filters (excellent replacement/upgrade in performance for MFJ-915)
MAXI-CHOKER feed line chokes are used to suppress common mode current
carried on the outside of the coax braid which is often responsible for
receiver noise and RFI in the receiver/transmitter. These chokes are very
useful for suppressing RFI common mode current at the antenna feed point,
at 1/2 wavelength intervals along the coax feed line and also at the
entrance to the radio station. This choke is available with a SO-239
input/output and ground/static bleeder stud (optional) for attachment to a
ground rod. Use an isolator every 1/2 wavelength for the antenna operating
frequency (include velocity factor in calculation). Use the ground lug
option for long coax antenna feed lines (over 1/2 wavelength at the
operating frequency of any antenna system in the near field of the coax).
Production Note: Maxi-Choker may be in Black or White color depending upon available inventory at time of shipment.
