The following tasks are easily accomplished by using this analyzer:
- Rapid check-out of an antenna
- Tuning an antenna to resonance
- Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
- Making coaxial stubs or measuring their parameters
- Cable testing and fault location, measuring cable loss and characteristic impedance
- Measuring capacitance or inductance of reactive loads
| Frequency range:Â |
0.06 to 55 MHz |
| Frequency entry: |
 1 Hz resolution |
| Measurement: |
25, 50, 75 and 100-Ohm systems |
| SWR measurement range:Â |
1 to 100 in numerical modes, 1 to 10 in chart modes |
| SWR display: |
numerical or analog indicator |
| R and X range:Â |
R and X range: 0…10000, -10000…10000 in numerical modes, 0…1000, -1000…1000 in chart modes |
Display modes:
- SWR at single or multiple frequencies
- SWR, return loss, R, X, Z, L, C and phase angle at single frequency
- SWR chart, 100 points
- R, X chart, 100 points
Non Volatile memory:
- 10 slots to save measurement results
RF output:
- Connector type: UHF (SO-239)
- Output signal shape: square, 0.06 to 35 MHz
- Output power: +13 dBm (at 50 Ohm load)
Power:
Two 1.5V alkaline batteries, type AA
Two 1.2V Ni-MH batteries, type AA *
Max. 4 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used
When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface:
320×240 color TFT display
6×3 keys on the water-proof keypad
Multilingual menus and help screens
USB connection to a personal computer
Dimensions: 103 mm x 207 mm x 37 mm (4.1 in x 8.1 in x 1.4 in)
Operating temperature: 0…40 °C (32…104 °F)
Weight: 310 g (10.9 Oz) w/o batteries
Warranty: 2 years
GTIN-13: 4820185420099
RigExpert AA-35 ZOOM is made in Ukraine.
Specifications are subject to change without notice.
* Batteries are not included with the analyzer*
