Phrozen Nylon-Green Tough Resin Green 1kg - FMTEGNYGRM

• High toughness and impact resistance
• Best for prototyping developments

• Weight: 1kg per bottle
• Density: 1.10 g/cm3
• Viscosity: 742 cP
• Surface Hardness: 68 Shore D
• Tensile Stress at Break: 19 MPa
• Elongation at Break: 30 %
• Tensile modulus: 600 MPa
• Notched Izod Impact: 23.79 J/m
• HTD at 0.45 MPa: 65 °C

*All specifications have been tested in a laboratory. Please note that certain specifications may be subject to change without prior notice.

• Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
• After printing, please keep used resins in a closed & opaque bottle.
• Avoid mixing used resin with new resin.
• Keep resin away from kids and away from direct sunlight exposure.
• Wear gloves and masks when using resins.
• If this chemical contacts the skin or eye, wash with plenty of water.DO NOT dump resin.
• Please cure it and treat it as general plastic garbage.