DeoxIT®, #D100L-25C (Needle Dispenser)
DeoxIT® D-Series – Contact/Connector Treatment, Deoxidizer, Rejuvenator & Protectant
Part No. D100L-25C:
- 100% Liquid, No solvents, 25 mL
Applicator:
- Precision Needle Dispenser, provides **NO flushing action**, applies 100% DeoxIT®.
Formulation:
Use:
- When contact and connector are easily accessible. No flushing action.
Notes:
- Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT®.
More than a Contact Cleaner . . . Improves & Protects Connections!
DeoxIT® D-Series contact treatment is a fast-acting deoxidizing solution that rejuvenates, lubricates, protects, and improves conductivity on all metal connectors and contacts.
Use as a general treatment for connectors, contacts, and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately **20% deoxidizing action**.
KEY FEATURES:
- Improves Conductivity
- Deoxidizes, Lubricates and Protects
- Reduces Intermittent Connections
- Reduces Arcing & RFI
- Reduces Wear & Abrasion
- Temperature Range, **-34 C (-29 F) to +200 C (400 F)**
*NOTE: Temperature ranges may vary depending on conditions. On critical applications, independent testing is highly recommended
