CyberBrick Time Lapse Hardware Kit - B-ZK005

1. Can't pair with "BBL_SHUTTER" device?
Please delete the paired "BBL_SHUTTER" device information from your phone and try pairing again.

2. Can't the camera find the "BBL_SHUTTER" device?
If another device occupies the Bluetooth port, it may cause the Bluetooth connection to not be retrieved. Please disconnect the time-lapse photography kit from the printer for 2 seconds and then reconnect.

3. Can't establish a Bluetooth connection with the paired time-lapse photography kit after restarting the camera?
Press and hold the multifunction button for 2 seconds to try to reconnect the previously paired device. If you still can't connect, delete the camera pairing information and pair it again.

4. Both the camera and the time-lapse photography kit have been powered off. The kit cannot be automatically connected after the camera is turned on?
Press and hold the multifunction button for 2 seconds to reconnect the previously paired device.

5. Frame dropping phenomenon occurs in the synthesized time-lapse photography video?
iOS device may miss files during photo transfer, please reconnect your phone to your computer to ensure that all photos are copied.

6. How many shooting devices can be controlled at the same time?
Supports up to 4 devices: connect 1 smartphone and 1 camera via Bluetooth, 1 camera via shutter cable, and 1 camera via mechanical servo.

Notice: For security and stability, the CyberBrick Multi-Function Core Board only supports firmware updates through official tools. Flashing with third-party tools is not supported and may cause irreversible damage, which is not covered by warranty. Please use only official tools for any firmware operations. Thank you for your understanding!