- Cables work with popular handy talkie (HT) models featuring K1 connector (3.5mm and 2.5mm TRS connectors)
- Data cable allows digital modes and packet radio protocols as FT8, FT4, SSTV, APRS, Echolink, Allstar etc
- Great for working satellites (e.g. APRS and SSTV)
- Data cable (black K1 connector) combines audio and PTT control, plugs into Digirig’s audio socket
- Chirp programming cable (green K1 connector) plugs into Digirig’s serial socket
- Coiled cable keeps things nice and tidy by preventing knots and kinks
- 24″ relaxed, 72″ fully stretched
- Shielded and RF choked with ferrite beads on both ends to prevent RFI
- premium quality materials and craftsmanship
The audio cable requires Digirig Mobile Revision 1.6 or later (any configuration).
Note: Digirig mobile is available in four different configurations. Configuration only matters if your transceiver is capable of serial CAT control or if you plan to use Digirig for programming the radio (firmware or settings), and is not strictly required for digital operations. You can still share a Digirig in incompatible configuration with a CAT capable transceiver if you don’t connect the serial cable.
