Genasun 10A MPPT Solar Charge Controller for Lead Acid Batteries
SKU
ZGN-10-PB-12V
$99.95
Ready to Ship!
Check Store Stock
Huntsville:
Las Vegas:
Distribution Center:
Genasun 10A MPPT Solar Charge Controller for Lead Acid Batteries
So you paid for a 140 Watts solar panel, and now you want to get your money’s worth. The GV-10 extracts more power from any given panel than a PWM or other MPPT controllers. PWMs may offer a lower controller cost, the GV-10 MPPT controller delivers more power reducing the cost per watt by 10-30%. The GV-10 is the ultra-high-speed MPPT solar controller.
- Maximum recommended panel power 140W, 10.5 A charging current. Advanced Multi-Stage charge profile for 12V Lead-Acid/AGM/Gel/Sealed/Flooded batteries.
- High-Speed MPPT: speed tracking 15 Hz (15 times per sec.)
- 98.3% Peak Efficiency and Tiny Night Consumption (0.9 mA)
- Advanced electronic protections for reverse panel and battery polarity.
- 5-Year Warranty, Made in the USA, certified cETLus, Class 1 Div.2, conform to CE, FCC, RoHS.
Charge Profile:
- Flooded batteries (Jumper ON):
- Bulk Voltage: 14.6 V
- Absorption Voltage: 14.4 V
- Absorption Time: 2.5 hours
- Float Voltage: 13.5 V
- Equalization Voltage: 15 V
- Equalization Time: 2h (every 30 days)
- Sealed batteries (Jumper OFF):
- Bulk Voltage: 14.3 V
- Absorption Voltage: 14.1 V
- Absorption Time: 2.5 hours
- Float Voltage: 13.7 V
Features:
- MPPT BUCK technology
- LED indicator for battery state of charge
- 98.3% Peak Efficiency
- High-speed MPPT Tracking (15 times per sec)
- Advanced electronic protection (over-temperature, panel overload, battery and panel switched, reverse battery polarity, reverse panel polarity)
- Tiny self-consumption
- Radio Silence, HAM Radio friendly
- Made in the USA
- 5-Year Warranty
Specification:
- Max. Recomm. Panel Power: 140 W
- Rated Battery (Output) Current: 10.5 A
- Max Panel Voltage: 34 V
- Max. Recomm. Panel Voc at STC: 27 V
- Min. Battery Voltage for Operation: 8.5 V
- Operating Temp. Range: -40 °C - 85 °C
- Night Consumption: 0.9 mA
- Environmental Protection: IP40, Conformal Coating, Nickel-Plated Brass & Stainless Hardware
- Connection: 4-position terminal block for 10-30 AWG wire
- Weight: 6.5 oz., 185 g
- Dimensions: 5.5" x 2.5" x 1.29"
- Certifications: cETLus, Class 1 Div. 2, CE, FCC, RoHS
Write Your Own Review