Open Box Bambu Lab A1 mini Combo 3D Printer
For more information about open box and used products, click here.
Key Features
- Full-auto Calibration.
- 4-Color Printing with AMS lite.
- Under 48 dB Low Noise in Silent Mode.
- Full-metal Linear Rails and Bearings.
- Vibration and Flow Rate Compensation.
Multi-Color Printing
The all-new AMS lite (optional) is elegant and reliable, making multi-color 3D printing accessible to everyone.
Active Flow Rate Compensation
The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
Full Auto Calibration
The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Plug-N-Play
The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.
Active Motor Noise Cancelling
The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Bed Slinger, with CoreXY Speed And Quality（High-Speed Precision）
Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.
Sync with Bambu Studio and Bambu Handy
Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.
AMS lite - Automatic Material System
Key Features
- Multi-Color/Multi-Material Capability
- Automatic Filament Backup
- Improved Spool Compatibility
- Easy to Maintain
- RFID Filament Sync
Multi-Color 3D Printing For Everyone
AMS lite brings colors to your 3D printed models, opens up a whole new world for your creativity to soar!
Filament Backup
With AMS lite, you can setup automatic filament backup to seamlessly load in new spool when the current spool runs out. Ensures an uninterrupted printing process and also preventing filament waste due to manual spool change.
Improved Spool Compatibility
The spring loaded rotary spool holder grips the spool at the center hole, improving spool compatibility especially for those paper spools.
Easy Maintenance
The simple and exposed design of the AMS lite makes it super easy to work on. Through the translucent shell, user can easily observe the inner operation structure to troubleshoot.
Hassle-Free Support Removal
With AMS lite, Bambu Lab printers can use snap-away support material or dissolvable filament to minimize the pain of removing supports.
Automatic Filament Identification
Bambu Lab filaments use RFID which is read by the AMS to automatically identify and apply the best settings for your material.
The RFID tag is synchronized automatically to Bambu Studio.
Non Bambu Lab Filaments need to be manually configured in Bambu Studio or in the printer.
The A1 mini Combo is a perfect entry-level printer for those looking to make their first foray into the world of 3D printing. Don't wait - order yours from GigaParts today!
