Phrozen Castable Resin W40 Orange 500g - FMTJWCAW4S

• 40% wax content.
• Formulated for casting medium to large pieces.
• Low shrinkage, high precision. Smooth and crisp surface finishing.
• With a minimal number of gates, you can easily cast anything you desire. Set up your printed models and clean up casted 3D models effortlessly.
• No foul/strong odor

Precautions

• Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
• After printing, please keep used resins in a closed & opaque bottle.
• Avoid mixing used resin with new resin.
• Keep resin away from kids and away from direct sunlight exposure.
• Wear gloves and masks when using resins.
• If this chemical contacts the skin or eye, wash with plenty of water.DO NOT dump resin.
• Please cure it and treat it as general plastic garbage.

• Quantity: 500g per bottle
• Viscosity: 500-550 cP
• Density: 1.05 g/cm3
• Surface Hardness: 60 Shore D
• Recommended layer height: 50 um
• Verified clean burnout with these investments: "Prestige Optima", "Plasticast" and "Ultravest Maxx"
• Ash content: 0.0-0.1% (ASTM E1131; TGA)

*All specifications have been tested in a laboratory. Please note that certain specifications may be subject to change without prior notice.