Icom RS-BA1, which gained popularity by being able to operate many of our machines such as the flagship machine IC-7851 from a PC via IP, will be released as a new version with more various functions.
In addition to the single mode of RS-BA 1 which is the old product, RS-BA1 Version 2 corresponds to the dual mode * 1 newly, and simultaneous reception of two waves is possible. Besides being able to control both MAIN and SUB frequencies, it is also possible to display spectrum scopes simultaneously in both bands.
In remote control, in addition to the interference cancellation function and filter setting that were supported by the old product, it corresponds also to the operation of RIT · ⊿ TX newly, and realized various control. In addition to manipulating with the remote encoder RC – 28 (sold separately) that realizes smooth frequency change, it corresponds to the operation with the mouse click on a new indicator, the panel enlarged display mode is installed, and the interface is further easy to use became.
Utilizing RS – BA1 Version 2 makes it possible to operate wireless devices at remote locations more smoothly than ever, further expanding the location and operation variations of the radio.
Please note that the new product RS – BA 1 Version 2 does not support upgrading from the old product RS – BA1. It is necessary to purchase new software. The product will be shipped to you on a USB drive.
Most Functions Can Be Controlled
Most functions and modes of your transceiver, including interference rejection functions and IF filter settings, can be controlled using the CI-V commands. The following functions are added to the RS-BA1 Version 2.
- Panel size can be enlarged (Normal or large size selectable)
- Indicator click operation to change the settings
- RIT and ⊿TX functions
- [MUTE] button
- SUB dial
|
IC-7851 IC-7850 IC-7760 IC-7610 |
IC-7800 IC-7700 |
IC-7600 |
IC-7410 IC-9100 |
IC-7300 |
IC-7200 |
IC-7100 |
IC-9700 |
IC-705 IC-905 |
Dualwatch Function |
✓ |
|
|
|
|
|
|
|
|
Server Function |
✓ |
✓ |
|
|
|
|
|
✓ |
✓ |
Remote Power ON/OFF |
✓ |
✓ |
✓ |
|
✓ |
|
✓ |
✓ |
✓ |
Spectrum Waterfall Scope |
✓ |
|
|
|
✓ |
|
|
✓ |
✓ |
Scroll Mode |
✓ |
|
|
|
✓ |
|
|
✓ |
✓ |
APF AF Level Adjustment |
✓ |
✓ |
✓ |
|
|
|
|
|
|
CW Keyer |
✓ |
✓ |
✓ |
✓ |
✓ |
|
✓ |
✓ |
✓ |
Voice Recording/Playback |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
USB Dial with Optional RC-28 |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ : Function available. - : Function Not available.
*Depending on your transceiver, some functions or modes cannot be used, or you need to update
the transceiver’s firmware.
Please use the latest firmware version of the transceiver.
Purchase your Icom IP Remote Control Software - RS-BA1 V2 22 from GigaParts today!
UPC: 731797041227
*Dualwatch and dual spectrum devices are only for the IC-7851, IC-7850 and IC-7610. The spectrum scope functions (single receive) are compatible with the IC-7300 and IC-9700.