Shelly Wave i4 DC
Manually activate or deactivate any created scene, run synchronized actions, or execute complex trigger scenarios. Control other Z-Wave devices within your network with one push of a button.
Key Features
- Manually control other Z-Wave devices (e.g., with a multi-button switch)
- Multi-click: activation of up to 12 actions
- Extremely low power consumption: < 0.3 W
- Z-Wave frequency band: 908.4 MHz
- Latest technology: Z-Wave 800 Series
- Automatic set-up with SmartStart
- Security 2 Authenticated for the highest level of security
- Over-the-air firmware updates
- Works with Z-Wave-certified gateways and over 4,000 Z-Wave devices
*A gateway (smart hub) is not included. A gateway (smart hub) is required for the configuration of the device.
Replace one of the switches in your room and control any other installed Z-Wave device!
Wave i4 DC allows you to manually activate or deactivate any created scene, run synchronized actions, or execute complex trigger scenarios. You can use it to control other Z-Wave devices within your network with one push of a button. Due to its retrofit design, it is small enough to fit behind every wall switch. Wave i4 DC can show the status and control the action of four inputs, offering maximum convenience by enabling manual control of your smart home to all family members.
Shelly Wave works on Z-Wave
By using Z-Wave, smart home products can seamlessly communicate with each other, regardless of their brand or platform, thanks to a centralized smart hub! Shelly devices work on the latest Z-Wave chip generation (S800), one of the most popular standardized technologies for smart homes in the world.
*Z-Wave devices have specific requirements in order to function correctly, such as the necessity to use a supported Z-Wave hub. For more information, please visit the official Z-Wave website: www.z-wavealliance.org
Works with any Z-Wave gateway
Wave i4 is retrofit and designed to fit behind switches/push-buttons. Once installed, include the device in your Z-Wave network (Z-Wave gateway is required) and control it using your smartphone or tablet. Shelly Qubino devices work with over 4000 Z-Wave certified devices and gateways.
- Z-Wave operated: Include Wave i4 DC to your Z-Wave network and control it remotely. It‘s compatible with all certified Z-Wave gateways.
- Multi-click support: Up to 12 possible actions. Control the lights, close the blinds, turn off outlets. Manually control any Z-Wave device within your network and run the scenes you desire.
- Wide range of voltage support: Wave i4 DC can be powered by 5-24 V DC.
- Associations: Establish direct communication between devices in your Z-Wave local network and set actions with no hub present! Configure up to 8 associations on the switch buttons and trigger them manually.
- Smart scenes: Set custom scenes by combining Wave i4 DC with any other Z-Wave devices (gateway required).
