The Ameritron ALS-600S boasts a continuous coverage of 1.5 to 22 MHz, 600 Watts PEP output power, and SWR protection to prevent amplifier damage in case you switch to the wrong band or use the wrong antenna. It also has over power protection that automatically reduces output power if it exceeds a safe level.
This amplifier includes an illuminated cross-needle SWR/wattmeter that lets you read SWR, forward and reflected peak power simultaneously. There is also an operate/standby switch that lets you run "barefoot," but you can instantly switch to full power if needed. Additionally, the front panel ALC control lets you adjust your output power, and the transmit, ALC, and SWR LED indicators keep you informed.
The ALS-600S comes with a separate switching power supply that can adapt to 90-130 VAC and 185-260 VAC, 50/60 Hz. It features step start inrush protection that stops damaging inrush currents and extends the life of power supply components. The illuminated cross-needle meter monitors voltage and current of the 50 VDC line, while the massive choke input filter greatly improves voltage regulation and reduces peak AC line current.
If you're looking for a reliable and easy-to-use linear amplifier, the Ameritron ALS-600S is your answer. This lightweight and compact amplifier is made in the USA and is available now. Contact your favorite dealer for your best price and order your ALS-600S with power supply today.
Made in America
Michael
- Ameritron's revolutionary ALS-600S is amateur radio's ONLY linear amplifier that uses four rugged TMOS RF power FETs -- gives unequaled no tune solid state performance.
- Includes ALS-600 Amplifier and a 120/220 VAC, 50/60 Hz AC switching power supply for home operation.
- Instant bandswitching, no tuning, no warm up
- Output Power -- 600 Watts PEP, 500 Watts CW
- Continuous Coverage -- 1.5 to 22 MHz
- SWR Protection -- prevents amplifier damage if you switch to wrong band, use wrong antenna or have high SWR
- Over Power Protection -- if output forward power or reflected power exceeds safe level, output power is automatically reduced to prevent amplifier damage by controlling ALC to exciter.
- Extremely quiet -- low speed, low volume fan is so quiet you'll hardly know it's there, unlike noisy blowers used in other amps.
- Very Compact -- 6 x 9 1/2 x 12 inch amplifier takes up less desktop space than your transceiver and weighs 12 1/2 pounds.
- Illuminated Cross-Needle SWR/Wattmeter -- lets you read SWR, forward and reflected peak power simultaneously
- Operate/Standby Switch -- lets you run "barefoot", but you can instantly switch to full power if you need it.
- Front Panel ALC Control -- exclusive Ameritron feature -- convenient front panel control lets you adjust your output power.
- Transmit, ALC SWR LED indicators -- keeps you informed.
- 12 VDC output jack -- lets you power low current accessories.
- Separate ALS-600SPS switching power supply (included) can be placed conveniently out of the way and plugged into your nearest 120 VAC outlet -- no special wiring needed. Lightweight idea for transporting. Made in USA.
- Enjoy 600 Watts of no tune solid state switching power. Call your favorite dealer for your best price, order ALS-600S with power supply.
- Massive choke input filter greatly improves voltage regulations nd reduces peak AC line current.
- Step Start Inrush Protection stops damaging inrush currents and extends life of power supply components.
- Illuminated Cross-Needle Meter monitors voltage and current of 50 VDC line.
- Extremely quiet fan.
- Very Compact 6 x 9 1/2 x 14 inches -- can be placed conveniently out-of-way.
- Wired for 120 VAC, supplies 50 VDC at 25 amps to ALS-600 amplifier.
- Adapts to 90-130 VAC and 185-260 VAC, 50/60 Hz.
- Draws less than 14 amps at 100 VAC and less than 7 amps at 230 VAC.
- Includes prewired cable to plugin to ALS-600 Amplifier.
Made in the USA
Ameritron Brand Manager GigaParts 3/22/23
