CAIG DeoxIT D100L Electric Cleaner Jar and Brush Applicator D100L-2DB, 7.4 ml

100% Liquid, No solvents (Applications = 500 +/- brush strokes, 10mm long), 7.4 mL

More than a Contact Cleaner . . . Improves & Protects Connections!

DeoxIT® D-Series contact treatment is a fast-acting deoxidizing solution that rejuvenates, lubricates, protects and improves conductivity on all metal connectors and contacts.

Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.

• Applicator: Brush, provides NO flushing action, applies 100% DeoxIT®,
• Formulation:   100% DeoxIT®.
• Use: When contact and connector are easily accessible. No flushing action. 
• For reference, DeoxIT® has approximately 20% deoxidizing action.
• Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection.  Wipe off and re-apply DeoxIT®.

KEY FEATURES:

• Improves Conductivity
• Deoxidizes, Lubricates and Protects
• Reduces Intermittent Connections
• Reduces Arcing & RFI
• Reduces Wear & Abrasion
• Temperature Range, -34 C (-29 F) to +200 C (400 F)