Image sensor: 1/5-inch CMOS with primary color filter
Number of recorded pixels
2560 x 1920
Storage media
Internal memory, microSD/microSDHC memory card
Storage capacity
Approximately 45 images in internal memory,
approximately 850 images per 1 GB in microSD/microSDHC memory card
Recording method
DCF compliant Exif Ver 2.3
Focus distance
f = 28 mm (35-mm film equivalent)
Aperture
F2.0
Auto focus
Single AF (with AF Illuminator)
Shooting distance
10 cm to ∞
Shutter speed
1/4 second to 1/8000 second (automatic switching)
Shooting sensitivity
ISO100 to 1600 (automatic switching)
Exposure control
Program AE
Exposure compensation: −2.0 EV to +2.0 EV (1/3 EV step)
Metering method: TTL 256 split metering, multi metering
White balance:
Auto, Fine, Shade, Fluorescent 1, Fluorescent 2, Fluorescent 3, Incandescent
Flash: Auto flash / Forced flash / Suppressed
Shooting range with flash: Approximately: 50 cm to 1.5 m
Self-timer: Approximately 2 seconds / approximately 10 seconds
Image effects
10 lens effects, 10 film effects
Total of 100 effects by multiplying above
Print function
Exposure Print pixel count
1600 x 600 dots
(800 x 600 dots when printed from smartphone app)
Exposure resolution:
25 dots / mm x 12.5 dots/ mm
(635 x 318 dpi, 40 x 80 μm dot pitch)
12.5 dots / mm when printed from smartphone app
(318 dpi, 80 μm dot pitch)
Interface
Standard compliance: Bluetooth Ver. 4.2 (BLE)
Exposure gradation: RGB gradation of 256 colors
Printable image format: JPEG images taken with this unit
Print output time: Approximately 16 seconds * Plus 7 seconds when printed using instax-Rich Mode immediately after startup.
Print function
Images in the internal memory and images in the memory card can be printed
Reprint
Reprint is possible for images stored in print history (up to 50)
3. Other
Smartphone app linked functions
Smartphone image print function, remote shooting function,
printed image transfer function, firmware upgrade function
LCD screen: 3.0-inch TFT color LCD screen
Pixel count: Approximately 460,000 dots
External interface: (1) Micro USB Micro-B (for charging only) / (2) USB Type-C (for charging only) *in transition to since manufacturing of mini Evo brown
Power supply: Lithium ion battery (internal type: not removable)
Charging function: Built-in
Possible number of printed images: Approximately 100 (from full charge) * The number of prints depends on the usage conditions.
Charging time: Approximately 2 to 3 hours* Charging time depends on the temperature.
Main unit dimensions: 87 mm x 122.9 mm x 36 mm (excluding projecting parts)
Main unit weight: Approximately 285 g
Operating environment
Temperature: 5℃ to 40℃
Humidity: 20% to 80% (no condensation)
Film used: FUJIFILM instant film "instax mini" (sold separately)
FUJIFILM NORTH AMERICA CORPORATION - ONE YEAR LIMITED WARRANTY FOR FUJIFILM INSTAX INSTANT CAMERAS
The FUJIFILM Instax Instant Camera (“Product”) contained in this package is warranted to the original end user purchaser by FUJIFILM. North America Corporation (“FUJIFILM”) only against defects in workmanship and materials for one (1) full year from the date of purchase (“Warranty Period”) from an authorized FUJIFILM dealer in the U.S.A. This limited warranty does not apply to any Product purchased outside the U.S.A. or from an unauthorized dealer, distributor or seller or any refurbished or reconditioned product. This limited warranty does not cover batteries, flash equipment or any other accessories which may be contained in this package (“Accessories”). This limited warranty is non-transferable and subject to the conditions and limitations set forth herein.