- Weight: 0.5kg /1kg/ 5kg per bottle
- Density: 1.11 g/cm3
- Viscosity: 130~180cP
- Surface Hardness: 75~80Shore D
- Tensile Stress at Break: 35.8MPa
- Tensile modulus: 2200 MPa
- Elongation at Break, EAB: 17.7%
- Notched Izod Impact:66.4 J/m
- HDT at 0.45 MPa: 57℃
*All specifications have been tested in a laboratory. Certain specifications are subject to change without prior notice. For the latest update, please refer to Phrozen’s official website.
- Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
- After printing, please keep used resins in a closed & opaque bottle.
- Avoid mixing used resin with new resin.
- Keep resin away from kids and away from direct sunlight exposure.
- Wear gloves and masks when using resins.
- If this chemical contacts the skin or eye, wash with plenty of water.DO NOT dump resin.
- Please cure it and treat it as general plastic garbage.