Phrozen TR300 Ultra-High Temp Resin Gray 1kg - FMTEGTR30M

• Ultra-High Temp Resistance With its heat deflection temperature of 160 °C, Phrozen TR3003D Printing High Temp resin is suitable for high-temperature resistance applications.
• Low Viscosity & Low Odor Phrozen TR300 High Temperature 3D Printing resin has low viscosity to use and clean easily. Odorless to affect the environment during printing.
• High Toughness & Low Shrinkage The products printed with Phrozen TR300 High-Temp 3D Printer resin have good mechanical properties such as high tensile strength, high toughness, and a low shrinkage rate. It is recommended for industrial prototyping.

Below specifications are tested after 30 minutes of post-curing.

• Weight: 1kg per bottle
• Density: 1.17 g/cm3
• Viscosity: 123.6 cP
• Surface Hardness: 80 Shore D
• Tensile Stress at Break: 59.9 MPa
• Elongation at Break: 3.9 %
• Tensile Modulus: 3443.7 MPa
• Notched Izod Impact: 22.1 J/m
• HDT at 0.45 MPa: 160°C (w200 °C, 1HR)

*All specifications have been tested in a laboratory. Please note that certain specifications may be subject to change without prior notice.