Used Good Yaesu G-450A Rotor with Control Box S/N9F290034. Box and Warranty Card have writing on them. Unit was checked by Yaesu and verified it works.
The Yaesu G-450A is the ideal antenna rotator for VHF and UHF antennas or small tri banders. The G-450A handles a wind load of 10 Sq. Ft. and a vertical load of 242 pounds. This rotator offers 450 degrees of azimuth rotation plus 180 degrees of rotation.Â
Specs:
| Power Supply Voltage: |
117 VAC, 50-60 Hz |
| Power Supply Current Consumption: |
0.5 Amps |
| Rotor Voltage: |
24 VAC |
| Cable Conductors Required: |
6 |
| 360° Rotation Time (Non Loaded): |
63 seconds at 50 Hz |
| 0 |
51 seconds at 60 Hz |
| Rotation Range: |
450° |
| Rotation Torque: |
43 ft-lbs |
| Braking Torque: |
217 ft-lbs |
| Maximum Vertical Load: |
242 Lbs. (100 kg) Continuous |
| Â |
660 Lbs. (300 kg) Instantaneous |
| Mast Outside Diameter: |
1.25 - 2.5 inches (32 to 63mm) |
| Braking Type: |
Mechanical stopper |
| Antenna K Coefficient: |
100 or less |
| Wind Loading Area: (Pole Type) |
0.5 m2Â or less |
| (Tower Type) |
1.0 m2Â or less |
| Maximum Continuous Duty: |
3 minutes |
| Operating Temperature Range: |
0°C to +40°C (Controller) |
| 0 |
-20°C to +40°C (Rotator) |
| Rotator Dimension: |
7.32 x 10.35 inches |
| Rotator Weight: |
7.71 lbs |
| Controller Dimension (WHD): |
7.48 x 4.92 x 5.90 inches |
| Controller Weight: |
5.95 lbs |
