Bambu Lab PLA CF 3D Printer Filament

Bambu Lab PLA-CF 3D Printer Filament

Product Features

• Carbon Fiber Texture & Minimized Layer Lines
• Improved Mechanical Properties
• Stablized Printing Dimension
• Comes with Basic Reusable Spool
• Diameter: 1.75mm +/- 0.03mm

Cautions for Use

• 0.2 mm Nozzle Not Compatible
• Stainless Steel Nozzle Not Recommended
• Dry before Use for the Highest Print Quality
• AMS & AMS lite Compatible

Bambu PLA-CF is carbon fiber reinforced PLA with improved stiffness and strength. PLA-CF is easy to print and beginner-friendly like regular PLA. It is AMS compatible with low clogging risk at high-speed printing. The prints are in matte finish with almost invisible layer lines, which make it suitable for printing general engineering parts or models requiring a better appearance, like bike frames, brackets and toys.

Carbon fiber texture & Minimized layer lines

The addition of carbon fiber gives prints a unique matte finish and effectively hides layer lines, providing a smooth, premium look.

Display of Prints

Bambu PLA-CF could be paired with any PLA series filament to make your prints more colorful and achieve various texture requirements.

Improved mechanical properties

Bambu PLA-CF exceeds the mechanical properties of PLA Matte in XY Bending Strength, Z Bending Strength, XY Bending Modulus, Z Bending Modulus, XY Impact Strength, and Z Impact Strength by between 20% and 115%, making it more suitable for printing models with higher strength requirements.

Mechanical Properties Comparison

*Drying PLA is recommended for humid environments at 55 °C for 8 hours before printing.

Stablized printing dimension

Bambu PLA-CF features low shrinkage and warping resistance to achieve a perfect matching accuracy between prints parts.

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Minimal effort in support removal

Bambu PLA-CF is designed to support itself. It can be removed more easily compared to regular PLA, and still maintains a smooth support surface.

Not prone to clogging in high-speed printing

Bambu PLA-CF is just as easy to print as regular PLA. It can be printed smoothly and consistently at high speed without clogging.

Printing Tips

• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on Bambu Lab's Wiki.

Accessory Compatibility

PLA-CF Hex Code Table

Parameters Comparison