Bambu Lab PLA Glow 3D Printer Filament

Bambu Lab PLA Glow 3D Printer Filament

Product Features

• Unique Glow in Low Light Conditions
• Includes Basic Reusable Spool
• Diameter: 1.75mm +/- 0.03mm

Cautions for Use

• AMS Compatible, but can lead to faster wear on internal components
• AMS lite NOT Compatible
• 0.2 mm Nozzle Not Compatible

Note: A hardened nozzle is required when printing regularly.

Bambu PLA Glow

PLA Glow stands out due to its incorporation of a unique additive: luminous powder. This variant retains the familiar qualities of traditional PLA, including easy printing, high quality, and exceptional overall mechanical properties. What sets PLA Glow apart is its distinctive feature - it glows in the dark. This makes it the optimal selection for crafting luminous nameplates, logos, jewelry, and various models that require a captivating glow effect.

Unique Glow in Low Light Conditions

Bambu PLA Glow incorporates a distinct additive: luminous powder, which imparts a special property to printed objects, causing them to emit a captivating glow in the dark.

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Accessory Compatibility

• *A hardened nozzle is required when printing regularly.
• *It is not recommended to print Bambu PLA Glow and other glow-in-the-dark PLA filaments with AMS Lite. These filaments, being hard and rough, may cause feeding failures due to substantial feeding resistance.

PLA Glow Hex Code Table

*The hex code indicates the daytime color of PLA Glow.

Printing Tips

• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on Bambu Lab's Wiki.
• Printing with a 0.2 mm nozzle is not recommended; instead, it is advised to use a 0.4 mm nozzle for optimal results.
• The model's luminous intensity diminishes over time, but exposure to ultraviolet or sunlight for a brief period (approximately 2 hours) can rejuvenate its glow. However, prolonged or frequent irradiation may expedite PLA aging.
• Not suitable for AMS lite: Utilizing AMS lite may result in high feed resistance and an increased risk of feed failure. Consider alternative methods such as pre-use drying for better outcomes.