Bambu Lab ASA 3D Printer Filament

Bambu Lab ASA 3D Printer Filament

Product Features

• Extraordinary UV Resistance
• Exceptional Temperature Resistance
• High Impact Strength and Durability
• Outdoor Use for Long-Term Purpose
• Comes with High Temperature Reusable Spool
• Diameter: 1.75mm +/- 0.03mm

Cautions for Use

• AMS Compatible
• AMS lite NOT Compatible
• Enclosure Printers Required

Bambu ASA

Bambu ASA is a highly durable material that offers exceptional UV, weather, mechanical, and thermal resistance. Its unique combination of properties makes it an ideal material for printing outdoor models (plant signs, mailboxes, wind vanes, etc.) and structural parts that require long-term exposure to challenging outdoor conditions.

Extraordinary Weather & UV Resistance

Bambu ASA offers extraordinary UV, oxidation, and aging resistance, providing effective protection against breakage and color degradation when used outdoors for long-term purposes.

Tough and Durable

Suitable for outdoor applications and regular structural requirements due to its toughness and high impact strength.

Better Temperature Resistance

Compared to normal PETG or ABS, Bambu ASA can remain in shape even at a temperature of 100°C.

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Frequently Asked Questions

• What's the difference between ABS and ASA?
  ABS - acrylonitrile - butadiene - styrene
  ASA - acrylonitrile - styrene - acrylate
  ASA is a modified version of ABS that contains an additional acrylate component, which improves its weather adaptability and UV resistance. ASA retains the impact resistance and processability of ABS while providing better resistance to fading, yellowing, and degradation from sunlight exposure. Both of them may release pungent and unpleasant odors during printing, but the pungent odor of ASA is notably lighter than ABS.
• What is the difference applications between ABS and ASA?
  ASA is ideal for outdoor applications, such as automotive exterior parts, signage, and outdoor equipment, thanks to its enhanced weather resistance and color stability. ABS is a versatile material with excellent mechanical properties that is commonly used for indoor applications.
• What are the similarities between ABS and ASA?
  In terms of physical and mechanical properties, both exhibit good impact resistance and high tensile strength, with almost the same levels of strength, toughness, and stiffness. Both ABS and ASA may release pungent and unpleasant odors during printing and the same warping tendency and enclosed printer requirement when printing large-size and/or high infill density models.

Parameters Comparison

Accessory Compatibility

ASA Hex Code Table

Printing Tips

• Pungent and unpleasant odors may be released during printing. Make sure your printer is placed in a well-ventilated area.
• Drying conditions: 80℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on Bambu Lab's Wiki.
• ASA is prone to warping when printing large size and/or high infill density model. To avoid warping: 1) Not recommemded to print too large size and/or high infill density models. 2) Use enclosure printers and ensure the build plate is properly glued before printing. 3) Set lower printing speed and higher heatbed temperature. For more details please refer to: Common print quality problems and solutions on Bambu Lab's Wiki.