Bambu Lab PETG HF 3D Printer Filament

Bambu Lab PETG HF 3D Printer Filament

Product Features

• Designed for Speed
• Print Flawlessly with Minimal Tuning
• Smooth, Soft Texture
• Ready for Outdoor Use
• Diameter: 1.75 mm +/- 0.03 mm

Cautions for Use

• AMS & AMS lite Compatible
• Dry Out Before Use

PETG HF must be dried before use to achieve optimal print quality.

PETG HF is a fully optimized PETG filament designed specifically for high-speed printing. With a default printing speed that is twice as fast as standard PETG filaments, PETG HF takes your printing efficiency to new heights.

It effectively addresses common issues such as oozing and clumping associated with regular PETG, ensuring smoother and more reliable prints. The new matte finish not only enhances the aesthetic by smoothing out uneven gloss during speed transitions but also provides a consistently uniform look.

Offering greater durability and toughness than PLA, PETG HF is the ideal choice for creating long-lasting items with an improved finish and faster production times.

Designed for Speed

Twice as fast as standard PETG*, PETG HF significantly boosts your productivity without compromising the quality of your prints.

*The speed of PETG HF can be twice as fast compared to regular PETG, but achieving this speed is highly dependant on model size and geometry.

Print Flawlessly with Minimal Tuning

PETG HF excels in printability among PETG filaments with its higher adaptability for printers and printing settings, achieving ideal print results without fine-tuning parameters. Thanks to advanced formula optimization, PETG HF bids farewell to oozing and clumping, ensuring smoother prints with crisp details.

Smooth, Soft Texture

PETG HF provides a smooth texture and consistent gloss at any printing speed, ensuring uniformity and sharp details in every print.

Ready for Outdoor Use

PETG HF maintains the inherent strengths of regular PETG, providing superior resistance to water, UV, and temperatures. Tougher and more durable than PLA, with higher temperature resistance, it's the perfect choice for printing outdoor items such as planter pots, bird cages, watering cans, and automotive parts. Additionally, it's ideal for outdoor toys that require long-term exposure and the ability to withstand impacts, collisions, and falls.

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Accessory Compatibility

PETG HF Hex Code Table

Parameters Comparison

1. Maximum Printing Speed* refers to the highest speed achievable by the filament while maintaining high print quality, given an appropriate increase in nozzle temperature.

2. Preset Maximum Printing Speed* refers to the highest speed achievable with default settings, ensuring top printing quality in most environments.

Settings: Bambu Lab X1-Carbon, 0.4 mm nozzle, 0.2 mm layer height

Printing Tips

• Dry out before use for higher printing quality. PETG HF must be dried before use and remain moisture-free during the printing process, especially for longer print times (over 6 hours).
• Drying conditions: 65℃ for 8 h in the Blast Drying Oven; 75 - 85℃ for 12 h in the X1 Series Heatbed. For more details please refer to: Filament Drying Recommendations on Bambu Lab's Wiki. Please note that the spool can withstand the higher temperature for drying on the heatbed.