What bands does the Icom IC-7300 cover?

The Icom IC-7300 is an HF and 6-meter transceiver. This means it can transmit and receive on all the major amateur radio bands in the High Frequency (HF) spectrum, plus the 50 MHz band, commonly known as the 6-meter band.

Does the Icom IC-7300 need an antenna tuner?

No, the Icom IC-7300 has a built-in automatic antenna tuner. This tuner is designed to match the radio's output to an antenna with a Standing Wave Ratio (SWR) of up to 3:1.

What is the Yaesu equivalent to Icom 7300?

When looking for the Yaesu equivalent to the Icom IC-7300, there are 3 main models that are most often compared: Yaesu FT-710 (The most direct and modern equivalent), Yaesu FT-DX10 (A slightly higher-end model that is also often compared), and Yaesu FT-991A (An older model with a key difference in capabilities).

What year was the Icom IC-7300 released?

The Icom IC-7300 was officially announced at the Japan Ham Fair in 2015. However, it became widely available for purchase and began shipping in early 2016.

Are Icom radios made in China?

No, genuine Icom radios are not made in China. Icom has a very strong and public stance on this, stating that all of its radios are manufactured in its own facilities in Japan.

How do I update the firmware?

The process involves downloading the firmware file from Icom's website, copying it to an SD card, and then performing the update on the radio itself through the menu system.

Where do i download the latest firmware?

You can get the latest firmware for the Icom IC-7300 by visiting Icom's website.

What is 'GENE' on the touchscreen?

This button appears when you tap the frequency display. 'GENE' is short for 'General Coverage,' allowing you to access frequencies outside of the standard amateur radio bands.

What does 'OVF' mean?

'OVF' stands for 'Overflow.' It indicates that the receiver is being overloaded by a very strong signal. The solution is to reduce the RF gain until the 'OVF' indicator disappears.

How does the real-time clock work, and why does it lose time?

The IC-7300 has a real-time clock backed up by an internal battery. If the battery loses charge, the clock resets when powered down. The solution is to keep the power supply on for about a week to fully charge the internal capacitor and battery.

Is RF getting into my radio/USB cable?

The IC-7300's sensitivity to RF interference on its USB line is a known concern. Using a high-quality USB cable with ferrite chokes is essential to prevent strange behavior or resets.

My receiver seems deaf or overloaded by strong signals.

This can be caused by receiver 'Overflow' (reduce RF Gain) or by strong local broadcast/nearby ham stations causing the receiver to become desensitized.

How do I save and load my settings?

The IC-7300 has an SD card slot, which is a key feature for backing up and restoring radio settings.

What is the successor of the Icom IC-7300?

The successor of the wildly popular Icom IC-7300 is the Icom IC-7300MK2. It builds on a legacy of excellence with enhanced performance and great new features.

Icom IC-7300 100W HF/50MHz SDR Transceiver

SKU: ZIC-7300

Availability:

In stock

$1,289.95

VIP Price

After Mail-In Rebate

Free Shipping

Must Have Accessories

In stock

Intellitron DM-5300 Desktop Microphone for Icom HF Radios

$49.95

Intellitron AR-600 Digital Antenna Rotator with Remote and Mounting Hardware

$249.95

Intellitron WM-1002A Analog SWR / Watt Meter 1.6-60 MHz 30W / 300W / 3KW

$99.95

Intellitron CK-2226D 16in Multi-Functional Digital LED Wall Clock

$34.95

Intellitron LA-1101 Lightning Arrestor 400w 50 Ohm DC-1000MHz SO239

$24.95

Intellitron DL-1505 200w Dry Dummy Load with PL-259 Connector

$69.95

Intellitron PS-2230MAB 30amp Switching Power Supply with Power Poles

$119.95

Intellitron ARI-800 Amplifier-to-Radio Interface Buffer

$89.95

Intellitron DM-5299 Desktop Microphone Station Console with Equalizer

$129.95

LDG Z-100A Zero-Power Automatic Antenna Tuner

$189.99

Icom IC-7300 Mars Cap Modification

$44.95

Nifty Accessories Mini-Manual for Icom IC-7300

$29.95

Description

Features

Specifications

Includes

FAQ

Icom IC-7300: The Revolutionary HF/50MHz SDR Transceiver
Step into the future of amateur radio with the Icom IC-7300, a groundbreaking HF/50MHz transceiver that redefines entry-level performance with its innovative RF Direct Sampling System. By directly digitizing RF signals, the IC-7300 achieves a remarkable reduction in inherent receiver noise, delivering exceptional clarity and sensitivity.

Key Features

Revolutionary RF Direct Sampling System: This technology directly converts RF signals to digital data within the FPGA (Field-Programmable Gate Array), resulting in a simplified circuit design and enhanced overall performance.
Class-Leading Real-Time Spectrum Scope: With unparalleled resolution and sweep speed, this scope lets you effortlessly identify and tune to desired signals with a simple touch.
High-Resolution Waterfall Function: Provides a visual history of signal activity, revealing weak signals that might be missed on the spectrum scope alone.
Integrated Audio Scope Function: Analyze your transmit and receive audio characteristics in real-time, displaying vital parameters like microphone compressor level, filter width, and CW keying waveforms.
Seamless Digital Mode Operation: Experience seamless digital mode operation with optimized FT8 mode presets and a user-friendly Scroll mode. The constantly evolving firmware keeps you at the forefront of digital communication.
Enhanced Receiver Performance with "IP+": The new "IP+" function further elevates receiver performance by improving the 3rd order intercept point (IP3), minimizing signal distortion when receiving weak signals in the presence of strong adjacent interference.
Superior Signal Quality: Benefit from class-leading RMDR (100 dB typical) and significantly improved phase noise characteristics, resulting in cleaner transmit and receive signals.
Effective Interference Rejection: Equipped with 15 discrete band-pass filters, the IC-7300 ensures that only the desired RF signal passes through, effectively rejecting out-of-range interference.
Intuitive and Smooth Operation: The combination of the multi-dial knob and the large 4.3-inch color TFT touch LCD makes for smooth and intuitive operation.
Built-In Automatic Antenna Tuner: This tuner memorizes tuning settings for rapid band changes and includes an Enforced Tuning function for temporary tuning in emergency situations.
Convenient Data Storage: The SD memory card slot provides convenient storage for received and transmitted audio, screen images, firmware updates, and more

Experience exceptional performance and user-friendly operation with the Icom IC-7300. Its innovative features and robust design make it the perfect choice for both new and experienced amateur radio operators.

You can purchase the Icom IC-7300 at GigaParts today!

UPC Code: 0731797024763

View Product Brochure

Popular Models Compared

Transceiver	Icom IC-7300	Icom IC-7300 MKII	Yaesu FT-991A	Yaesu FT-710 Field	Yaesu FT-710 AESS	Yaesu FT-DX10
Key Advantage	SDR Value King	HDMI, USB-C, & LAN	HF/VHF/UHF/C4FM	Portable with Handle	Dual Speaker Audio	Elite Hybrid SDR
Best For...	Beginners & Easy SDR Use	Remote Shacks & Monitors	All-in-One Shack Use	POTA & Portable Ops	Desktop High-Fidelity Audio	Elite DXing & Contesting
View Detail	VIEW NOW	VIEW NOW	VIEW NOW	VIEW NOW	VIEW NOW	VIEW NOW

Icom IC-7300

Key AdvantageOriginal SDR Value King

Best ForBeginners wanting a simple, popular SDR.

VIEW NOW

Icom IC-7300 MKII

Key AdvantageHDMI, USB-C, & LAN Built-in

Best ForExternal monitors and modern remote connectivity.

VIEW NOW

Yaesu FT-991A

Key AdvantageAll-Band (HF/VHF/UHF/C4FM)

Best ForOne radio to do everything from HF to local repeaters.

VIEW NOW

Yaesu FT-710 Field

Key AdvantagePortable with Built-in Handle

Best ForPortable operators needing a rugged 100W station.

VIEW NOW

Yaesu FT-710 AESS

Key AdvantageSuperior Audio (Dual Speaker)

Best ForHigh-fidelity audio and the latest SDR processing.

VIEW NOW

Yaesu FT-DX10

Key AdvantageHigh-End Hybrid SDR Receiver

Best ForSerious DXers or contesters looking for elite performance.

VIEW NOW

General
Frequency coverage	Rx^*1	0.030–74.800MHz (Guaranteed range: 0.500–29.999, 50.000–54.000MHz.)
Frequency coverage	Tx^*1	1.800–1.999MHz 3.500–3.999MHz 5.255–5.405MHz^_2 7.000–7.300MHz 10.100–10.150MHz 14.000–14.350MHz 18.068–18.168MHz 21.000–21.450MHz 24.890–24.990MHz 28.000–29.700MHz 50.000–54.000MHz ^1USA version. Varies according to version. ^*2 Some frequency bands are not guaranteed.
Mode		SSB, CW, RTTY, AM, FM
Number of channels		101 (99 regular, 2 scan edges)
Antenna connector		SO-239 (50Ω)
Power supply requirement		13.8V DC ±15%
Power consumption	Tx	21A (at 100W output power)
Power consumption	Rx	0.9A typical (Standby), 1.25A (Maximum audio)
Operating temperature range		–10˚C to +60˚C; 14˚F to 140˚F
Frequency stability		Less than ±0.5ppm (–10˚C to +60˚C; 14˚F to 140˚F)
Frequency resolution		1Hz
Dimensions (W×H×D) (projections not included)		240×94×238mm; 9.4×3.7×9.4in
Weight (approximately)		4.2kg; 9.3lb
Receiver
Receiver system		Direct Sampling Superheterodyne
Intermediate frequency		36kHz
Sensitivity	SSB/CW	(BW: 2.4kHz at 10dB S/N) 1.8–29.999MHz 0.16μV (Preamp 1 ON) 50MHz 0.13μV (Preamp 2 ON)
	AM	(BW: 6kHz at 10dB S/N） 0.5–1.8MHz 12.6μV (Preamp 1 ON) 1.8–29.999MHz 2.0μV (Preamp 1 ON) 50MHz 1.0μV (Preamp 2 ON)
	FM	(BW: 15kHz at 12dB SINAD) 28.0–29.7MHz 0.5μV (Preamp 1 ON) 50MHz 0.25μV (Preamp 2 ON)
Squelch sensitivity (Threshold)	SSB	Less than 5.6μV
Squelch sensitivity (Threshold)	FM	Less than 0.3μV (HF: Preamp 1 ON, 50MHz: Preamp 2 ON)
Selectivity (sharp filter shape)	SSB	(BW: 2.4kHz) More than 2.4kHz / –6dB Less than 3.4kHz / –40dB
	CW	(BW: 500Hz) More than 500Hz / –6dB Less than 700Hz / –40dB
	RTTY	(BW: 500Hz) More than 500Hz / –6dB Less than 800Hz / –40dB
	AM	(BW: 6kHz) More than 6.0kHz / –6dB Less than 10.0kHz / –40dB
	FM	(BW: 15kHz) More than 12.0kHz / –6dB Less than 22kHz / –40dB
Spurious and image rejection ratio	HF	More than 70dB 50MHz: More than 70dB (Except for ADC Aliasing)
Audio output power		More than 2.5W (at 10% distortion with an 8Ω load, 1kHz)
Transmitter
Output power (HF/50MHz)	SSB/CW/FM/RTTY	2–100W
Output power (HF/50MHz)	AM	1–25W
Modulation system	SSB	Digital P.S.N. modulation
	AM	Digital Low power modulation
	FM	Digital Reactance modulation
Spurious emissions		Less than –50dB (HF bands), Less than –63dB (50MHz band)
Carrier suppression		More than 50dB
Unwanted sideband		More than 50dB
Microphone impedance		600Ω

We found other products you might like!

Icom IC-7300MK2 100W HF/50MHz SDR Transceiver

$1,499.95

Yaesu FT-991A HF/VHF/UHF 100W All Mode Transceiver

Yaesu FT-991A 100W All-Band Multimode Portable Transceiver

$1,369.95

Yaesu FT-DX10 100W HF/50MHz Compact SDR Transceiver

$1,499.95

Yaesu FT-DX101D 100W HF/50MHz SDR Transceiver

$3,749.95

Icom IC-7610 32 100W HF/50MHz RF Direct Sampling SDR Transceiver

$3,999.95

Kenwood TS-590SG 100W HF/50MHz Transceiver

$2,079.95

Customers who bought this item also bought

Customer Reviews

Overall

Great value in POTA / Portable Rig + Easy to use!

Review by NT4AT

After deciding that sometimes I wanted more power for my portable operations, I investigated external amplifiers for my QRP rig. The most compatible and easiest to interface were the most expensive - and I'd be carrying 2 boxes and cables (to leave at home). So, with the rebates on the IC-7300, I thought I'd give it a try. I literally received the rig a couple of days before the Virginia QSO party. I live in a high rise condo on a lower floor - so no outdoor antennas - thus I couldn't operate the IC-7300 before the contest. I did use a dummy load to set the audio gain and ALC. But, the first ops were in the field. I was impressed with the ease of use - I was making QSOs on 20 meters within a couple of minutes of connecting the 40-10M EFHW antenna. The display is truly amazing - and easy to adjust for bright conditions. A 20 AH LiFePO4 batter was up to the task of running full power SSB for the day. I realize that I've just scratched the surface of the capabilities of this rig. For hams new to HF, or needing an easy to use rig - at a great price - this is a winner!

Overall

Waste of Money

Review by AJ7IZ

This transceiver is very disappointing. I usually operate QRP when I am out touring on my motorcycle, and chose the 7300 as the start of a shack for my house, and it turns out I wasted my money. After setting up my home station I ran comparisons with my mobile rig (a cheap X6100). When using the same antenna, my X6100 has a lower noise floor, and can receive signals the 7300 doesn't even know are there. The scope on my cheap chineese transceiver is not only more sensitive, it is also much easier to read. The only good thing I have to say about the 7300 is that the internal speaker seems to be decent.

Overall

great radio

Review by kq4znz

my first HF radio, I'm very happy with how easy and intuitive this radio functions. Lots of great features and i love the waterfall display, it makes it very easy to see where the action is without having to spin the dial thru all the bands. The touch screen feature is also very nice. I've made contacts in the Midwest already and am looking forward to my first DX

Overall

Fantastic Radio

Review by Bill

I just upgraded from my IC-718 to this IC-7300. What a difference. The touch screen with waterfall is an exciting new addition. Changing bands is a snap and the automatic tuner is a bonus. Overall, it is easy to use and the menu is intuitive. I especially like the three filter positions, adjustable width, and sharp or soft skirt options for filtering. If you get one you will not be disappointed.

Overall

Great radio

Review by Jeff KF0MPM

So simple and powerful. Between 6 months same as cash and 100.00 rebate, buy of the month! Brand new radio for the same price guys on EBAY selling used radios for same model.

Overall

Why Did I Wait So Long to Purchase It?

Review by John

Received my new 7300 just before Christmas and I've been using it everyday. I'm so glad I bought it. So easy to use and so many helpful features. FT8 is a breeze with this radio.

Overall

Easy to use HF radio.

Review by W4KG

Easy radio to use and program, This makes the 4th Icom in my radio room.
I have used it on a folded dipole, and a multi band dipole. noise reduction covers a wide range of QRN.

Overall

IC-7300 revue

Review by Terry

Best radio on the market for the price. I love my IC-7300.

Overall

Verdict is still out

Review by N5KDA

I'm switching over to this rig from my IC756 Pro II that I'm tired of working on. The rig is nice, but it's going to take awhile for me to get used to the menu system. I'm used to there being a button to push for anything that is used often, so the learning curve for this 61 year old is stepper than the IC-7610 may have been. These days, I don't see paying for the 7610 when I don't need all of the features anymore. I may give it five stars after using it a month or so.

Overall

Great Rig - Love That Spectrum Scope!

Review by David

My IC-7100 died, So, I replaced it w/ this unit. I never had a unit with a spectrum scope b4. Didn't think I wud use it, but I love it because I can see who is doing CW and where they are in the band. Then, I switch frequencies by touch. Functionally, this is a 7100 with a color screen and a scope, so the transition for me was easy!